These are instructions on how to jailbreak your 4.3.5 firmware iPhone in using RedSn0w for Mac If you are on 4.3.3 or ensure that IOS are not updated to 4.3.5. Use JailbreakMe place without ties. You can find the tutorial here JailbreakMe appropriate.

If you want a less jailbreak firmware, you can find the tutorial right here.

Step One

Create a folder on your desktop called Pwnage

Download RedSn0w from here and put it in the Pwnage folder. Likewise, download the latest firmware 4.3.4 and 4.3.5 below and put it in the same folder.

4.3.4 (iPad 1): iPad1,1_4.3.4_8K2_Restore.ipsw
4.3.5 (iPad 1): iPad1,1_4.3.5_8L1_Restore.ipsw
RedSn0w Extract the zip file by double clicking.

Phase Two

Connect your iPhone to your computer and open iTunes.

Select from the list of equipment left iPad. Now, hold the option and click the Restore button. Restore is better because it does not create any wasted space on your iPad.

Navigate to the Pwnage folder on your desktop and select the 4.3.5 firmware ipsw. Click the Select button to continue.

Step Three

When iTunes has finished updating your iPhone with the firmware you want to open the Pwnage folder on your desktop and run the program from redsn0w redsn0w folder we extracted earlier.

Step Four

When RedSn0w opens, click the Browse button

Step Five

Select the 4.3.4 firmware ipsw, we have placed in the Pwnage folder on your desktop, then click Open.

Step Six

Once the firmware has been verified on the Next button to continue.

Step Seven

RedSn0w will now prepare the data jailbreak

Step Eight

From this window, you can choose the options you want to jailbreak. Make sure that Cydia is selected and click Next to continue

Step Nine

Please connect your iPhone to your computer and make sure its OFF then click the Next button

Step Ten

RedSn0w now heads the steps to achieve DFU mode. You can find more information here in DFU mode

Hold down the Home button and power button for 10 seconds.

Release the power button and hold the home button until RedSn0w detects the device.

Step Eleven

Your iPhone will restart now

Twelve step

RedSn0w will then begin downloading the new RAM Disk and the nucleus.

Step Thirteen

Once this is complete you will be notified that RedSn0w done. Click Finish. When you restart your iPhone late (5 minutes or so) is jailbroken with Cydia on the table.

BOOT connected:

Since this is connected to Jailbreak Redsn0w you to help you start the machine jailbreak the device if it is off for some reason. Connect your iPhone to your computer, start the RedSn0w, just select the boot when connected to the options window and click Next RedSn0w is the boot device.



Follow these steps.

Step One

See Also: Samsung Mobiles Activate iphone,jailbreak, iPhone 4G, Mobile Phone Solution, Mobile Phone Repair

» Read More...

We launched a beta version of redsn0w for iPhone3G & iPod Touch 2G FW 4.1 or 4.0. Use the same feat pwnage2 DFU mode has been used since the 2.x days Destroy not include the use pod2g developed. Nothing new is revealed to Apple with this jailbreak.

IF YOU USE THE RELEASE UltraSn0w, please wait TO SUPPORT PwnageTool 4.1. DO NOT USE RedSn0w. This should be used redsn0w to 4.1, you must have already upgraded to 4.1 from Apple official. If you do this, you lose your unlock ultrasn0w (possibly infinite).

Version of Windows needs more tests, so for now it is only available for Mac OS X x86. Windows version will come soon as the bugs are fixed.

Note: If you are a ipt2g "MC" model, will be connected to the 4.1 Jailbreak ... I'm sorry! (What supports or back to FW jailbreakme.com spiritjb.com)

What devices, platforms and FW versions are supported?

This beta version supports:

* The iPhone 3G and iPod touch 2G only (so far)

* Mac OS X x86 and Windows (for now)

* 4.1 or 4.0 firmware from Apple

How do you use?

If you already upgraded to 4.1 or 4.0 device, the following are:

1. Launch redsn0w 0.9.6b1 beta

2. Select a stock 4.1 or 4.0 ipsw (you've used this device to update the 4.1 or 4.0)

3. Select "Install Cydia" and all the other options above, then click "Next." Use DFU mode to install the jailbreak.

Note: If you choose "Enable the percentage of the battery," really rock and off via Settings-> General-> use.

Download Links

* OS X
* Windows

Update: All users of Windows to show "Waiting for reboot" for too long (more than 20 seconds), please try to "shake up" process in JB Disconnect and reconnect the USB cable (while leaving redsn0w continues to operate). Also, try using a USB port "close" to your computer (as opposed to on screen or behind another hub). We are still tweaking Windows speed and therefore your comments will be able to provide assistance!

ultrasn0w unlockers

With Turkey Day a few days, Apple has released version 4.2.1 FW. As always, ultrasn0w unlockers please stay out of official firmware (and all the official firmware). Wait for the ability to create 4.2.1. IPSWs not updated the band! If you are not a software version, keep reading!

The best news of all is for the owners of the iPhone3G, iPhone3GS elderly and non-MC iPod touch 2G. Through a combination of our original pwnage2 arm7_go exploit and use 24kpwn limera1n that the device is "equally jailbreak than ever." To take full advantage of a loose 4.2.1 jailbreak.

Here are the owners of all new devices. The good news is that due to the use of limera1n Geohot all modern aircraft can be unlocked (this will be true until Apple released new hardware that limerain Geohot set to explode in the boot ROM). The bad news is that the 4.2.1 jailbreak * Attached to these new devices. A jailbreak in captivity means that each time the device loses power or the battery needs to be rebooted, plug into a PC or Mac to begin in the released state. @ COMEX working hard on a 4.2.1 jailbreak method that can disentangle, but may require you to have your spots SHSH 4.1 for use. No word on how much effort it will take that (please do not @ error COMEX that!). (We also have another method that may work, but the method @ COMEX is much more elegant.)

So when this action can jailbreak 4.2.1? Well, if you are a developer or builder JB, you've probably used the redsn0w mentioned in our last message to jailbreak 4.2.1 and at least get SSH working. But beyond that, there are still some last minute problems with MobileSubstrate and COMEX kernel patches that are fixed. Let's Twitter blog and post an update when everything is available (we like to ETA, but if unforeseen problems, probably later today). Sometimes "now" ... see Bulletin No. 1.

In the meantime, be sure to have a 4.1 SHSH patches on all devices. These are important, even beyond firmware 4.1 (using the Comex, and the method and the alternative, depending on how each of them walk away.)

ultrasn0w unlock: After redsn0w is officially released with the new Cydia and kernel patches, we will be able to assess the state of liberation. It is very promising, so expect to unlock the iPhone 3G and 3G coming this week. I4 Unlocking requires more effort, however, and there is no specific information available over it yet.

Feel free to ask questions in our comments section below, where we have some amazing new additional moderators - sherif_hashim, and dhlizard Frank55!

Update # 1: redsn0w version 0.9.6b6 is now available for your enjoyment jailbreak 4.2.1. Please read the above to understand what it means to jailbreak yet.

Update # 2: The concept of a "captive" jailbreak is fairly new for many people, so here is a brief overview of what you can expect:

1. If you are in an iPhone3G, iPhone3GS bootrom ipt2g ex-MC or not, life is easy. redsn0w jailbreak installed without attachments and anything below is applied.

2. "Connected" does not mean you can not boot at all without a PC / Mac help. If you have not installed any adjustments that the loop of important programs as a springboard or CommCenter, the car actually started. However, programs such as Jailbreak, Cydia does not (and may still have the Cydia icon is white). In addition, some integrated applications, which had to be moved to handle Cydia (Safari is the clearest example).

3. If you have the settings MobileSubstrate springboard hook or other important programs, their implementation will fail because (you're stuck at the Apple logo). You must use redsn0w to "Just boot attached at this time."

Update # 3: We redsn0w updated to include "one-click" of support for those of you running the 4.2.1 jailbreak captive. Using the command line arguments, you can now skip the screen that are normally seen as using redsn0w to "Just to start now a captive."

The command line arguments available are:

J-redsn0w to ask for "just start now linked to this"

-I Enter your IPSW Reference

-O for iPod touch 2G bootrom old and iPhone 3G

B define its own boot logo png

For example, to get a Mac redsn0w to connect the trunk of the 4G iPod Touch Jailbroken in 4.2.1:

open ~ / ~ Desktop/redsn0w.app-args-ji / Desktop/iPod4, 1_4.2.1_8C148_Restore.ipsw

This requires both redsn0w IPSW and is in its desktop OS X, to change if necessary! Included in the zip file is a sample script that you can double click to start redsn0w like this (the example assumes that Windows is all in C: \). (Mac users:. Please do not forget to change the permissions of the *. custom control to allow the execution)

This should help relieve pain in the jailbreak @ COMEX anchor to reach a untether 4.2.1 (or, for those of you with legitimate access to 4.2b3 IPSW until "Jailbreak Monte "untether is out of beta)!

* Racing from iTunes 10.1 for best results

* Users of Windows 7 should work redsn0w EN "XP compatibility" MODE

* Make sure you use a USB 2.0 port

Download Links

* OS X
* Windows

» Read More...

Yesterday, Apple released the latest 4.2 builds in more detail IOS, IOS 4.2.1. Evasion are ready, and we can help you get through the process of Jailbreaking the device.

But first a few comments: If you have an unlocked phone, DO NOT use this jailbreak. In fact, if your phone is unlocked, should avoid completely iOS 4.2.1.

Jailbreak is also a captive. This means that you must connect your device to your computer every time you reboot, to maintain the functionality of your RedSn0w jailbreak and run. This concerns some of the most recent IOS devices like the iPhone 3G (new bootrom) iPad, iPod Touch 2G (Model TM) 3G and 4G iPod Touch iPod Touch and IPAD. Meanwhile, older devices like the iPhone 3G and iPod Touch 2G (non-MC-model) using an untethered jailbreak.

That said, we go.

1) Take the jailbreak of one of the following RedSn0w download:

Mac - Redsn0w_mac_0.9.6b4.zip
Windows - Redsn0w_win_0.9.6b4.zip



Files can be found at the following sites. We propose to create a new folder with a convenient name like "Jailbreak" with a copy of the ipsw.

- Mac OS XiPhone ~ / Library / iTunes / iPhone Software UpdatesiPad ~ / Library / iTunes / IPAD software UpdatesiPod touch ~ / Library / iTunes / iPod Software Updates

Note: The tilde "~" represents your home directory.

- Windows XPiPhone C: \ Documents and Settings \ [username] \ Application Data \ Apple Computer \ iTunes \ iPhone Software UpdatesiPad C: \ Documents and Settings \ [username] \ Application Data \ Apple Computer \ iTunes \ iPad Touch Software UpdatesiPod C: \ Documents and Settings \ [username] \ Application Data \ Apple Computer \ iTunes \ iPod Software Updates
Note:If you don't see the Application Data folder, you may need to show hidden files.

- Windows 7 and VistaiPhone C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software UpdatesiPad C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software UpdatesiPod touch C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates

Note: If you don't see the AppData folder, you may need to show hidden files.

3) You should see the following message:

4) Choose "Install Cydia 'and press the following:


5) Make sure your iPhone or iPod Touch is turned off and connected to the computer before touching the side, as shown below:



6) after hitting the next, putting a guide driving device in DFU mode. Follow the instructions carefully.

7) Sit back and watch the pretty progress bar:

8) Finally, the following message:

9) If you have one of the new devices like the iPhone 3G (new bootrom) 4 iPhone 2G (non-MC model), 3G, 4G, iPad and want to keep the jailbreak and RedSn0w use features, you will need to connect your device and run RedSn0w and check out "Simply start a captive now." Otherwise, your applications jailbreak does not work.

10) Many users have noticed that Cydia does not seem to work when they completed the jailbreak installation. This is because you must restart your iPhone or iPod Touch and select that "just boot attached now" option. When you start in this way Cydia work. Please note that from now on, you must start on the path to your jailbroken apps work. Hence the name "captive" jailbreak, which literally means your unit must be connected to your computer every time you turn it on. (Do not confuse with the awakening of your iPhone to be asleep or in standby). Unfortunately, this is the only way to do it now. This is why many take to jailbreak in bulk. We hope that clears things.

also read more about Redsnow Jail Break

» Read More...

The just released PwnageTool 4.3 can jailbreak the iPhone 4.3.1 iOS 4, 3G, iPhone (first generation), 4G/3G iPod touch, Apple TV, and at the same time maintaining a base band for former users 4 and iPhone 3G to unlock it using the existing version of Ultrasn0w.

If the iPhone does not rely on the carrier to open, you can use Windows and Mac Redsn0w easily jailbreak your 4.3.1 IOS. Complete step by step instructions can be found here.

Unlike the last version, this version of PwnageTool 4.3.1 brings full jailbreak iOS untethered for all devices except the IPAD 2. This untethered 4.3.1 Jailbreak IOS is based on an exploit discovered by security expert and an iPhone enthusiast Stefan Esser, who gave a demonstration on an iPod touch last week before returning to the Dev-Team the rest.

IOS was originally 4.3.1 jailbroken last week in the bundles PwnageTool (Mac) and Sn0wbreeze (Windows), but it is only related to boot.

NOTE: If you are a Windows user, follow our step by step tutorial posted here to jailbreak 4.3.1 iPod touch IOS (loose) 4 in the iPhone, 3G iPhone, using Sn0wbreeze 2.5.

Step 1: Download everything you need to escape, here's a list:

* Download PwnageTool 4.3 for Mac.

* Download the 4.3.1 firmware IOS. Put all the files on your desktop for quick access.

Step 2: Run the PwnageTool (that you downloaded in step 1) in expert mode. Choose your device when this screen appears:

Step 3: When you click on the blue button first appears you will be asked to navigate in the IOS firmware 4.3.1. Just do it.

Step 4: Now, a second screen appears with some options. Just select "Build" from them and again click the blue arrow forward.

Step 5: PwnageTool will tell you that is "Building IPSW" to the next screen to do the work to create a custom firmware for you ..

Step 6: Once PwnageTool has finished creating a custom firmware, you will be prompted to enter your device into DFU mode. If you do not know how to get your device into DFU mode, follow these steps:

* Press and hold Power and Home buttons for 10 seconds.

* Release the power button but hold the home button for 10 seconds.

When your unit goes into DFU mode following IOS displays a blue confirmation.

Step 7: Now, finally, you must restore the custom firmware on your device IOS. Open iTunes and click on the connected device iOS located in the sidebar. Now press the Shift key on Windows or press the Alt key while your Mac and click the "Restore" button (as shown in the screenshot below).

By clicking on 'Restore' iTunes will prompt the custom firmware. Ipsw. Find the file Custom IOS 4.3.1 firmware that you created in the previous steps.

Step 8: Your work here is finished, iTunes will restore the 4.3.1 firmware on the device and restart the IOS IOS device jailbroken state.

 How Do I Unlock 4.3.1 IOS:

» Read More...

The iPhone dev released a new version of IOS to jailbreak redsn0w 5 beta. The press release is for developers to test their applications jailbroken with latest Apple operating system for mobile phones. The Dev Team warns people that jailbreak will not work around IOS 5 beta activation. You always need a developer account and an activation IOS UDID registered 5 on your phone. Jailbreak is bound and only compatible with the iPod touch 3G/4G, IPAD 1, iPhone 3G and iPhone 4 (GSM / CDMA).

WWDC 2011 draws to a close, and developers of applications for jailbroken cydia probably wants to get all the goodness 5 IOS. It seems the right time to release the jailbreak redsn0w attached to the 5th IO devices are supported:

* IPod touch 3G

* IPod touch 4G

* IPad 1

* IPhone3GS

* IPhone4 (GSM)

* IPhone4 (CDMA)

AND THESE preserve unlockers basebands unlockable should stay away from this! The most likely lose the baseband to unlock if you try to install IOS 5.

THIS jailbreak is only intended for application developers jailbroken! There are too many broken parts (Apple Apps official, 3rd third-party applications from the App Store, Cydia applications MobileSubstrate applications, etc.), this is useful for everyone, but really want to correct errors in the 5 IOS jailbroken apps. (Seriously!)

THIS IS NOT RedSn0w HACTIVATE 5.0b1! You must be a developer with a iOS UDID registered in all screens of different re-activation. PLEASE DO NOT PIRATE SOFTWARE! Only those registered with Mac developers can develop applications IOS, and only people with legitimate access to the beta IPSWs. See Bulletin No. 1 below.

THIS IS A attached Jailbreak ONLY! No new exploits are exposed to jailbreak (it uses is Geohot limera1n bootrom exploit), but it has a price. You need to use redsn0w "Just start now attached" to use a lot of things, including Cydia and Safari. If you see an icon for Cydia or white or Cydia crash Safari when you open them, because you do not start bind.

IF YOU HAVE THE WEB BASED ON YOUR ... 06.15 this redsn0w 3G went on iTunes restore error you get when you use the stock IPSW (anyone except those with 06.15 band should go anywhere near the town IPSW!).

redsn0w work as most likely be able to use it in the next beta IOS5, while pointing to redsn0w IPSW 5.0b1. IPSW so keep that handy!

Although most people start redsn0w double clicking on it, remember there are "advanced" options to those who invoke shell terminal:

Here the downloads links:

• redsn0w 0.9.8b1 for Mac
• redsn0w 0.9.8b1 for Windows

» Read More...